Roll-In Bases vs Transfer Use, and Which Trim Kit Fits
| Product Line | Configuration | Key Figures | Pairs With |
|---|---|---|---|
| ADA-SP-6238-10 | Roll-in base, 62" x 38" | Barrier-free entry, acrylic | Any trim kit below + AL7-08 valve |
| ADA-SP-6232-10 | Roll-in base, 62" x 32" | Barrier-free entry, acrylic | Same |
|
ST-7018 kits Chrome, brushed nickel, matte black |
Shower-only trim: single-function head, integrated diverter, hand shower with slide bar, 59-1/2" hose | ADA-compliant lever handle; AL7-08 rough-in valve sold separately | Roll-in compartments |
|
ST-7008 kits Chrome, brushed nickel, matte black |
Tub + shower trim: adds tub spout | Same handle/valve/hose set | Tub-shower units |
Base dimensions are unit figures; the §608 compartment and threshold requirements apply to the installed compartment, so compliance is confirmed at the installed condition.
What the 2010 ADA Standards Require at a Shower
| Requirement | Figure | 2010 ADA Standards Section |
|---|---|---|
| Roll-in compartment size | 30 x 60 in minimum clear inside dimensions | §608.2.2 |
| Threshold | 1/2 in maximum height, beveled in accordance with §303 | §608.7, §303 |
| Shower spray unit | Hand-held spray on hose 59 in minimum, usable fixed and handheld | §608.6 |
| Controls | Operable with one hand, no tight grasping or twisting, 5 lbf max | §608.5, §309.4 |
| Grab bar provisions | Per compartment type; see the GB-100 grab bar | §608.3 |
Shower Systems and Handheld Units for Accessible Bathing
ADA Shower Head Systems
ADA-ST-71 dual head systems combine a fixed head with a slide-bar hand shower, in chrome, brushed nickel, and matte black. The hand-held unit meets the §608.6 hose minimum and is usable fixed or handheld.
Explore ADA Shower Systems
ADA Handheld Shower Heads
ADA-ST-72 handheld units with slide bar, for retrofits and compartments where the fixed head is already in place. Same three finishes; hose length sized to §608.6.
Explore ADA Handheld Shower Heads
Grab Bars
Grab bar provisions at a shower are set per compartment type (§608.3) and mounted per §609. The GB-100 grab bar is specified alongside the roll-in bases and trim kits on this page.
Explore the GB-100 Grab Bar
Specifying the Complete Accessible Shower
A roll-in base alone does not establish compliance; the installed compartment does. Coordinate base footprint, finished threshold, control location, hose length, grab bar placement, and the AL7-08 rough-in valve as one schedule line, and send the accessible fixture schedule for dimensional comparison and availability. Every product page carries the dimensioned drawings for submittal review.
The master dimension table covering bathrooms and kitchens is on the ADA compliance hub.
Get Project Pricing for Wholesale ADA Showers
One partner for every phase, from specification through final installation. Same-day quotes, volume pricing, in-stock inventory, and dedicated reps keep your project on budget and on schedule.
-
01
Same-Day QuotesRequests received by 2 p.m. ET on a business day are quoted the same day. Anything after 2 p.m. is quoted first thing the next business morning.
-
02
Volume Pricing That Scales with Your ProjectPricing is tiered by unit count, so a 40-unit renovation and a 400-unit new build each get a rate that fits the job.
-
03
One Catalog, Stocked for the Whole JobSource every category in your spec from a single supplier with inventory depth for multifamily and commercial volumes. Finishes stay consistent across phases, there are no mid-project substitutions, and orders ship direct to your jobsite.
-
04
One Account Rep, Start to FinishA dedicated Allora USA representative owns your order end to end: product selection, spec sheets and submittal packages, order coordination, and installation questions.